Hospital Bed Movers — North America
StaminaLift hospital bed movers eliminate the physical strain and injury risk of manual bed pushing — one operator, joystick control, FDA-registered. Available in standard and bariatric configurations. TR Group routes purchasing through authorized distributor partners.
TR Group, Inc. is the North American contact for StaminaLift product support. Purchasing is handled through authorized distributor partners.
Tell us what you need and where you're located. We'll route your inquiry to the right distributor.
TR Group routes purchasing through authorized distributor partners across North America.
Why It Matters
Manual bed pushing is one of the most common causes of musculoskeletal injury among hospital transport staff. Modern hospital beds — fully loaded with patient, equipment, and IV lines — can exceed 1,000 lbs. StaminaLift puts a motor between the staff member and that load.
One staff member moves beds that previously required two — or that were causing injury trying. Reduces staffing demand per transport and eliminates the "find a second person" delay.
Full forward, reverse, and turning control via joystick — precise maneuvering in narrow corridors, elevator entries, and tight room layouts.
StaminaLift bed movers are FDA-registered for hospital use — meeting the regulatory requirements for powered patient transport equipment in US healthcare facilities.
The TS-6000 handles push/pull loads up to 1,984 lbs (900 kg) — engineered for bariatric beds and fully loaded ICU equipment configurations.
Model Selection
Two models cover standard and bariatric hospital bed transport requirements.
| If you need… | Recommended model |
|---|---|
| Standard hospital bed transport | TS-5000 — 1,323 lbs (600 kg) push/pull capacity |
| Bariatric bed transport or heavy ICU loads | TS-6000 Bariatric — 1,984 lbs (900 kg) push/pull capacity |
Common Questions
How do I purchase StaminaLift bed movers?
TR Group works through a network of authorized distributor partners across North America. Submit an inquiry with your facility type, bed weight range, and fleet size and we'll connect you with the right distributor.
What is the push/pull capacity of each model?
The TS-5000 handles push/pull loads up to 1,323 lbs (600 kg), covering standard hospital beds fully loaded with patient and equipment. The TS-6000 Bariatric handles up to 1,984 lbs (900 kg) for bariatric beds and heavy ICU configurations.
Does the StaminaLift attach to any hospital bed?
StaminaLift bed movers are designed to interface with standard hospital bed frames. Your distributor can review compatibility with your specific bed models and provide guidance on any adapter requirements.
Is training required to operate a StaminaLift?
The joystick interface is designed for intuitive single-operator use. Distributors typically provide onsite orientation as part of delivery. Share your fleet size and training requirements in the inquiry form and your distributor can plan accordingly.
TR Group can help route your inquiry to an authorized distributor based on your bed weight range, facility layout, and fleet size.
Let's Get You Equipped